MULTITOOL BELT AND DISC GRINDING ATTACHMENT, 915X50MM, 178MM DISC

The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The
technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding,
grinding, sharpening, shaping, polishing and refinishing.

• EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
• VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping.
  The unit can also be swivelled vertically or any position in between.

• ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into
  sharp corners.

• QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential
  components and zinc plating.

• 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
  • 36″ x 2″ (915 x 50mm) belt – 100 Grit
  • 7″ (178mm) diameter disc – 120 Grit
  • 3 1/2″ (89mm) diameter rubber contact wheel
  • 5 1/2″ (140mm) diameter drive wheel
  • Suits most 150mm & 200mm bench grinders with a minimum of 1/3 HP motor and screw mounted guards