The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The
technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding,
grinding, sharpening, shaping, polishing and refinishing.
- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping.
The unit can also be swivelled vertically or any position in between. - ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into
sharp corners. - QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential
components and zinc plating. - 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
- 36″ x 4″ wide (915 x 100mm) belt.
- 7″ (178mm) diameter disc.
- 3 1/2″ (89mm) diameter rubber contact wheel.
- 5 1/2″ (140mm) diameter drive wheel.
- The 364 suits most popular 8″ bench grinders with a screw mounted wheel guard and a minimum of 1/2 HP, though 3/4 HP is recommended.
- Suits grinder shafts sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″.
- Fitting Kit supplied.
